Learn The Advice The Experts Know About Hotels

Most people have been burned by bad hotel at some point. It can prove to be a costly mistake and people should avoid making it twice. Planning for best accommodation Sydney booking in advance will help immensely, especially when you have decided the best area to stay.

You can find good deals on hotel rooms using online and check out some of the travel sites out there. If you are a member of a hotel loyalty program, don’t forget to add that information as you check rates. You may also be able to get discounts due to AAA or AARP membership.

You should put any expensive items to keep them secure.

Plan your trip as far in advance for the best rates. Many hotels offer discounts if you are willing to book a few months in advance. You might even be able to save 50 percent off at some very exclusive hotels.

Book your appointment as early as possible. The best massage therapists are well-known at resorts, so get in while you can.

Are you a member of the AAA? If so, hotels may provide you a discount.You might be surprised where hidden discounts may be lurking. You can save five percent or even 10% on your hotel stay just by showing your membership card. It’s a way to save money that really adds up fast.

If you want to work on saving the environment, you can chose a “green” vacation. There are plenty of eco-friendly hotels that take the environment into consideration. Some new hotels were built to green standards and are certified green. Some older inns just select one or more eco-friendly so they can show environmental awareness. Talk to your travel agent in order to find the best green hotels.

Join a membership program if you frequently stay there on business trips. These programs allow you to collect points can translate into some major perks when you’re vacationing.

Get an AAA membership to facilitate the process of booking a hotel when you travel.Parents with young children will appreciate the complimentary car seat provided in many locations.

Start looking in the hotel bathroom when checking for bed bugs. This is the place least likely to find them. It is a safe spot for pets and kids to stay.

Ask if there is smoking or non. If you’re someone who doesn’t like cigarette smoke, you might want to avoid hotels with smoking rooms. Smokers also sometimes smoke in rooms that the room they are not supposed to smoke in.

Be sure you understand your hotel’s smoking policy is if you smoke cigarettes. A lot of places have rooms designated for smokers. Ask to see if any of these are a smoker. If they find you have smoked in a non-smoking area, a big penalty can come along with it.

You should be aware whether or not the hotel’s policy concerning pets. These hotels sometimes have odors because the floor and linens have absorbed them. Some hotels are pet-friendly and don’t charge for it, while others charge substantially more. The fee may not be adequate to cover the extra cleaning that needs to be done.

Some hotels have these amenities at all. Talk about these issues as you make your room.

Never check out earlier than your scheduled departure date unless it is absolutely necessary. The hotel might charge a fee for early departure fee. When you book a hotel room, the hotel can’t offer the room to someone else, if you depart early they will lose money.

Avoid sleeping under the hotel bedspread.The top bedspread usually isn’t cleaned as often as the linens are. This bedspread could be a hotbed of germs. Just make sure you remove this covering from the bedspread.

Don’t drink the bottled water and open it! After checking in you may be thirsty and thirsty. You can be tempted to casually open that bottle of water beckoning on the mini-fridge. Hotels take advantage of their guests by charging ridiculous pricess for that already exorbitantly priced bottled water. Check the gym instead; they offer it for free. A better option to simply bring a few of your own bottles.

You can often save money if you book a flight and hotel at the same time. Travel websites offer big savings to people who book both your flight and hotel.

Try to get a hotel upgrade without paying for it.You can do this by checking in exactly at the time when you are supposed to check in. If your room isn’t clean yet, you may be offered a better room at no additional charge.

Some hotels rooms offer a better view than others. If you do not have to pay more for a room with a good view, opt for the one with the best view. A good view will make your vacation to another level. It doesn’t hurt to ask them if they can get you a room with a better view.

You should always avoid paying the full price posted at a hotel. Call them and ask about deals. You can also locate great discounts on travel sites.

Use special occasions to book a hotel while travelling. Hotels sometimes offer freebies to guests when they know you are celebrating a milestone birthday or anniversary. You may also be able to get free champagne bottle or a similar thing.

Check online websites such as Expedia to find good deals.You may have to bid on the price, and some may just provide you with a star rating and price without giving you the name of the hotel.

Watch out for extra fees if you are using a third-party booker. Many times the quotes you are given do not reflect all of the fees and charges.

The hotel’s quality might not stay consistent among different establishments in a chain may be inconsistent. It is the best idea to check individual hotels so that there are no surprises upon arrival.

Nobody ever wants to reserve a room in a bad hotel. Saving a lot of money isn’t worth being uncomfortable in your room. Your trip will be ruined, regardless. That’s why you should use the above guidelines to find a hotel that’s not only affordable, but acceptable by your standards. You can probably now find a really great deal too!

See Sydney Harbour From Anzac Bridge: Part of the Seven Bridge Circuit Walk

We set out after breakfast up Pyrmont Street; it’s hard to believe that this street used to be the heart of the industrial area. The tree-lined street-scape is extremely quiet on this glorious Saturday morning and as we continue we catch glimpses of towering Anzac Bridge to the left. Luxury home rental Sydney is extremely expensive but for a vacation with family it’s worth.

Finally we arrive at Giba Park, the park opens up and there stretched before us is beautiful Johnson Bay sparkling like a billion stars with the winter sun bouncing off the surface.

The pathway meanders around Pyrmount Park and on towards Anzac Bridge; we’re not sure which is the best route but we are all enjoying the Sydney foreshore looking magnificent in the early morning light. Getting engrossed in the location we ended up taking the long way around towards the access point to Anzac Bridge.

Impressive access ramp

The access point to Anzac Bridge is very impressive, the concrete overpass snakes and curves effortlessly to the top. The 120 metre towering structure is very imposing with its stark white concrete and steel cables towering into the deep blue sky. The view of Johnston Bay and Glebe Island is incredible, however the vibrate colours of the bay in conjunction with the light bouncing off my camera lens doesn’t do it justice. The length of the bridge is around 805 metres and the traffic is fast and noisy but the view is well worth the effort. One thing that amazed us was the cleanliness of the location thus far, no rubbish, everything looked cared for and maintained. This is a grand testament to the great city of Sydney.

Learn to read a map

Reading a map is an important part of exploring a new area, so it was at this point that I lead everyone up the garden path so to speak. After crossing Anzac Bridge I felt we should climb the stairs to the overpass on the left where the Western Distributor’s endless streaming cars were passing underneath. This was a big mistake we should have continued and climbed the overpass on the right to Lilyfield Road. Don’t make that mistake! (I was reading the map sideways!)

Rozelle a trendy leafy suburb

We are now heading away from the busy roads and towards Iron Cove Bridge; the Streets of Rozelle are leafy and old-world. We pass by parks with Mum and Dads watching their children play there Saturday morning football games, with their younger siblings screaming with delight.

The smell of coffee is heavy in the cool air and we are ready for a latte, however it will have to wait till we get to University of Sydney College. Due to my incorrect map reading we have lost quite a bit of time, so no investigating this beautiful suburb today looking for a cafe.

Sydney College of the Arts

We entered the grounds of this beautiful green expanse and head for the harbour, these grounds are the home to a number of historic buildings known as Callan Park a hospital for the mentally ill and criminally insane. It had quite a reputation in its day. However we won’t be investigating it today!

Beautiful Sydney Harbour is back in view and before us is Iron Cove Bridge, but not before we sit for a while on the stone wall at King George Park and admire the view of Iron Cove. After our break we are back on the beat and looking for the access point to the old structure of Iron Cove Bridge, we want to be on the right side of Victoria Road.

From Iron Cove Bridge, we spy Birkenhead Point shopping precinct, with it marina… wouldn’t it be nice to arrive at the shopping precinct by boat. The sight of the shops beckons us to visit, and we make a quick detour to check them out.

The next massive bridge structure is Gladesville Bridge this bridge had the longest single span of concrete ever constructed in 1964. The vistas from this bridge are magnificent, but watch out for the cyclist’s while you are hugging the bridge rail taking all those photographs. At this point busy Victoria Road swings away to the left and the arterial road changes to Burns Bay Road.

Tarban Creek Bridge

After crossing Gladesville Bridge we were guided down a winding pathway and here’s where it got a bit tricky, locating how to access Tarban Creek Bridge was a challenge. The best tip is this, when you are directly under the bridge you will see a hole in the wall or a tunnel we walked through here and headed back up the hill to access Tarban Creek Bridge.

While we were trying to figure out the direction we came across fellow walkers wandering around looking for the access point to the Gladesville Bridge, so we exchanged bearings and continued on.

Fig Tree Bridge

Fig Tree Bridge is the last of the seven bridges circling Sydney Harbour, however we decided we wouldn’t walk across, hunger pains had now taken over our bodies and it’s time to rest up at the Hunters Hill Hotel for one of their famous chicken burgers and a well-earned break. We have succeeded in covering half of the Harbour Circle Walk and crossed the seven bridges of Sydney Harbour. Well six bridges really, Fig Tree Bridge will be crossed when we walk the North Shore side of Sydney Harbour very soon.

These are the seven bridges of Sydney Harbour loop

Sydney Harbour Bridge
Anzac Bridge
Iron Cove Bridge
Gladesville Bridge
Tarban Creek Bridge
Fig Tree Bridge

At this point I could say that we walked back to our accommodation at Darling Harbour, but we didn’t. Instead we decided to walk back across Tarban Bridge to Huntleys Point and catch the ferry to Darling Harbour. Some pre-walk planning had taken place, originally I had hoped we could have explored another way back, through a local reserve but after my flawed map reading ability (looking at the map sideways) I thought it best we went back across Tarban Bridge and follow a familiar route to Huntleys Point and along Huntleys Point Road to the roundabout and then to Gladesville Wharf. The ferry ride back to Darling Harbour took us around fifteen minutes, and was a fitting end to a wonderful day.

Take a break in Sydney

If you enjoy walking and want to take advantage of seeing famous Sydney Harbour from elevated bridges this is the walk for you. Check out the government site for walking maps of Sydney, you could spend days discovering this beautiful city and return to comfortable accommodation in the evening. So plan a weekend in Sydney or maybe a walking holiday. One bit of advice; I wouldn’t plan to walk the seven bridges of Sydney Harbour during the summer months, you just might fry with all that concrete and steel!

However if you are an early riser by all means, get going early watch the sun rise over Sydney Harbour and do some research and take one of the many transport options back to your accommodation.

See you next time…North Shore here we come!

The 7 bridge walk around Sydney Harbour is a wonderful way to experience this beautiful city. Prepare beforehand and plan your transport back via bus or ferry, but if that’s seems all to hard. Join the official walk along with thousands of people around the end of October each year. You can see the photos of Sydney Harbour from Anzac Bridge on my blog. http://gilliancallcott.com/

Article Source: http://EzineArticles.com/expert/Gillian_Callcott/590753

Article Source: http://EzineArticles.com/6370845

10 Quirky Air Conditioning Facts That Will Blow Your Mind

Your home’s air conditioner has a lot more history than you may think. It’s a modern luxury that we often forget we are privileged to have until it goes out on us in the peak heat of summer. When you have an emergency 24 hour electricians Melbourne, you should never attempt to correct the problem on your own.

Air conditioning has changed a lot over the course of history. Here are 10 trivia facts about AC that will definitely spark great dinner conversation.

1. The First Places to Use AC?: Movie Theaters

Surprised? Us too. Movie theaters were among the first public places to have air conditioning, as a ploy to try to get everyone to come to the movies.

Theaters would release big pictures in the summer, hence the term “summer blockbuster.”

2. What Relies on Air Conditioning to Survive?: Medications

Air conditioners allow many of the medications you take each day to be studied and developed. Researchers require cool and less-humid air in their labs to accurately study these groundbreaking necessities.

3. The U.S. Uses the Same Amount of Energy to Power AC Systems as Which Continent?: Africa

The U.S. is one of the biggest consumers of air conditioning in the world. We use so much of it, that our energy consumption for them is equal to the amount of energy Africa uses every year to power the entire continent.

4. Before BTU’s, How Were Air Conditioner Output Ratings Judged?: Ice

Prior to the invention of the air conditioner, people used to keep cool with large blocks of ice. So, when air conditioners were first introduced in 1902, their output ratings were judged based on how much ice you would need to get the same cooling power.

5. What Was the Driving Factor Behind the Invention of the Air Conditioner?: Newspapers

In 1902, Willis Carrier came up with the idea when working at a publishing company. He needed a way to keep his paper from expanding and the ink from running. Viola!

6. Air Conditioners Are Responsible for Changing What in Humans?: Our Heat Tolerance

Scientific studies have shown that the introduction of air conditioning has actually lowered the natural human tolerance for heat. Meaning a hot summer’s day seems much more amplified than it did to people generations ago.

7. Who Created The First Pseudo Air Conditioner?: The Chinese

In 180 AD, a Chinese artisan invented a 10-foot wide rotary fan that had seven connected wheels. It could cool an entire hall of people just by turning a crank.

8. Who Is Considered the Father of Air Conditioning & Refrigeration?: John Gorrie

Gorrie was a Floridian doctor, and in 1842 he developed a machine that made ice in order to cool the air for his patients. He was granted a patent to create a similar machine for homes and buildings, but died before he could create it.

9. What U.S. Landmark Building was Among the First Ever to Use Air Conditioning?: The New York Stock Exchange

The New York Stock Exchange Building was one of the first buildings to use air conditioning in 1903.

10. The Invention of the Air Conditioner Changed What Other Industry? Architecture

Before air conditioners, architects used to design homes and buildings with high ceilings, porches, breezeways, and landscaping that provided shade in order to keep occupants cool.

Heating and Cooling Myths You Probably Believe

In the spirit of sharing things you didn’t know, we thought we’d share these heating and cooling myths you probably were taught to believe.

Whether it’s common sense that doesn’t actually make sense, or because of technological updates, there are tricks you probably use each day that are actually costing you money instead of saving it.

Read on to see if you’re guilty of believing these common misconceptions.

Ceiling Fans Cool Your Home

Fans move air, and moving air feels cooler on the skin. So, if a room is feeling warm, fans are a great way to cool it down – as long as someone is in the room. While fans create wind, they don’t change the temperature.

When fans are left on in an empty room, they’re not dropping the temperature, but they can help keep the air from feeling or smelling stagnant when you get there.

Close the Register if You Don’t Use the Room

While it makes sense on the surface, this myth is actually outdated. Sure, in the past, heating systems benefited when they only had to heat a small space. When modern systems are installed, each room is considered and factored into the system and closing rooms off displaces pressure for your heater.

Today, closing the register creates an imbalance for your heating system and closing too many can even cause a breakdown.

Fireplaces Mean Less Work for Your Heating System

There’s something about a fireplace – that soft crackling sound and flickering light is totally unique. But if you’re using your fireplace to lessen the work for your heating system, you’re fooling yourself.

The fact of the matter is that a fireplace is a great big hole in your ceiling, and since heat rises, it escapes through that hole. Take note and add in the fact that most people purchase firewood, and you’re spending far more than you’re saving.

Looking to keep your home more comfortable? Consider a humidifier – for a myriad of different reasons.

Duct Tape Is Great for Sealing Ducts

Not so much. Duct tape is good at a lot of things, but sealing ducts is definitely not one of them. When duct tape is used to patch up duct work, it consistently fails, usually within the year. If you’re looking to seal up your ducts, you’ll be far better served by mastic or foil tape.

We hope this information helps you make better heating and cooling decisions regarding your home as well as helps to save you money on your heating and cooling bills.

If you’d like more information on making your home more efficient with a new furnace, air conditioner, or geothermal system, We have plenty of options available for new Lennox systems and rebates are usually available.

Dealing With & Treating Swimming Pool Algae, Mustard Algae, Black Algae, Algaecide & Green Alga

Algae is a common problem in swimming pools. What is it; what are the different types & how is it successfully prevented and treated. First of all, algae is a single-celled plant form. Some are aquatic (live in water), some are not. Algae utilizes the process of photosynthesis to manufacture its own food. Algae comes in very wide variety of colors and forms making it adaptable to almost any condition. Although some forms are virulent – especially Black or Mustard algae -, most are harmless and pose no more than a nuisance to most pool owners. Due to algae’s microscopic size, it takes literally millions of these plants to accumulate to be noticed by the naked eye! By that time it may be too late and very costly to correct. Prevention of algae blooms is the best solution. Pool removal cost Sydney for removing the structure and fill in the open space is not always a concern.

Green Algae: The most common form of algae that we deal with in swimming pools is “green” algae. Green algae (varies in color from blue-green to yellow-green to dark-green) can be free floating in the water (turning the water a hazy-green) or can be wall-clinging (patches of green). Wall-clinging varieties range in severity from small patches on pool walls and bottoms to virtually covering the entire pool surface. Green algae has the ability to clog filters and may even cause surface damage if left untreated. Green algae can be treated fairly simply and quickly with a proper, aggressive shocking & algaecide.

A relative of regular green algae is “small-celled green algae” (SCGA). The difference is seen in these areas: 1. The water remains relatively clear. Many treat the problem (without proper analysis) as a copper or mineral problem, however the metal chelants will show no effect. 2. When treating with chlorine, chlorine seems to “disappear”. SCGA is very resistant to even high levels of chlorine.

Other mid-summer types of green algae noticed is “green spots” all around the pool, especially in shady areas. The water is almost always “very clear”. The water can have a “stinging” sensation. This is normal green algae, typically brought about by lack of homeowner care; i.e. not following a weekly maintenance routine such as the Once-a-Week 3 Step program combined with very low pH and very low Total Alkalinity.

Treatment: Have water properly analyzed. BALANCE THE POOL WATER. Pools treated with chlorine or bromine should aggressively shock with chlorine (BioGuard Burn Out® or Smart Shock®) and use a good quality algaecide such as Back Up®, Algae All 60®, or Banish® in extreme cases. Pools treated with SoftSwim or other Biguanides should top up their Bactericide level “B”, add a double dose of algaecide “A”, and add a double dosage of shock or “C”. Follow up either method with Optimizer Plus® (a borate product similar to ProTeam Supreme). Treating algae with Sodium Bromide should be discouraged (sodium bromide treatments, can, in time, cause a chlorine demand problem).

“Black Algae” (actually blue-green algae) forms in cracks and crevices on pool surfaces, especially plaster finishes. We normally find black algae growing in, but not limited to, shady areas of the pool. Black algae is more typically found in concrete or plaster finished pools; it is very uncommon to find it in vinyl liner pools. It is known for a heavy slime layer and “skeletal growths” that make it impervious to normal chlorine levels. When viewed in a swimming pool, the water remains relatively clear, however, almost all customers notice a high chlorine demand (use much more chlorine than normal). When brushed, “black algae” will be difficult to budge and even though it seems as if it has been removed, the black algae will most likely return to the exact same spots within 24 hours.

What we’re beginning to understand is that Black Algae is “aided” by swimming pool bio-films. As bio-films accumulate on pool surfaces, they act as a kind of “breeding bed” providing nutrients and a “soft” place to set down roots. Removal of the bio-film dramatically aids in the long term treatment of Black algae. The more that the bio-film is removed and continually removed, the less likely Black Algae will be able to set down.

Treatment: Have water properly analyzed. BALANCE THE POOL WATER. Prior to and during treatment, the algae MUST be thoroughly brushed in order to “break open” the slime layer that covers and protects the Black Algae cell. During treatment, the chlorine level MUST be maintained in excess of 3.0 ppm – this may require daily shocking of the pool – AND the affected areas MUST be thoroughly brushed 2 to 3 times per day to allow the chlorine treatment to penetrate the algae. TRUE Black Algae is very resistant to treatment and can be transferred from pool to pool via bathing suits and pool toys. Failure to do these critical steps will prevent the treatment from working. Pools treated with chlorine or bromine should aggressively shock with chlorine (Burn Out® or Smart Shock®) and use a good quality algaecide such as Back Up®, Algae All 60®, or Banish® in extreme cases. Pools treated with SoftSwim or other Biguanides should top up their Bactericide level “B”, add a double dose of algaecide “A”, and add a double dosage of shock or “C”. Follow up either method with Optimizer Plus®. Treating algae with Sodium Bromide should be discouraged as mentioned above.

“Mustard Algae” is probably the MOST misdiagnosed form of algae. Mustard algae is a chlorine-resistant form of green algae (yellow-green to brown in color) typically found in sunbelt areas. It often resembles dirt or sand on the bottom or sides of a pool. In our market area (Fairfield county CT), the number of TRUE Mustard Algae cases that we treat can be counted on ONE HAND in most seasons. Mustard Algae is prevalent in Sunbelt areas. Mustard Algae has certain characteristics: It can be brushed away very easily, but returns quickly to the same location.

Keep in mind that the “algae” may be returning to the same place due to a dead spot in the pool. Be sure that you have good circulation through out the entire pool.

Although it usually creates a large Chlorine demand, it has been known to survive in high levels of Chlorine – over 3.0 ppm. It is extremely important to remove mustard algae growth from equipment (including the back of underwater lights & ladders) and bathing suits to avoid cross or recontamination of other pools. Pool equipment can be left in the pool during product application or cleaned separately with a mild cleaning solution. Rinse thoroughly if equipment is used in a SoftSwim® pool. Bathing suits should be washed with detergent as directed on garment label.

Treatment: Have water properly analyzed. BALANCE THE POOL WATER. Prior to and during treatment, the algae MUST be thoroughly brushed in order to “break open” the slime layer – such as with Black Algae. Failure to do this critical step will prevent the treatment from working. Pools treated with chlorine or bromine should aggressively shock with chlorine shocks such as BioGuard Burn Out® or Smart Shock® and use a good quality algaecide such as Back Up®, Algae All 60®, or Banish® in extreme cases. Pools treated with SoftSwim or other Biguanides should top up their Bactericide level “B”, add a double dose of algaecide “A”, and add a double dosage of shock or “C”. Follow up either method with Optimizer Plus®. Treating algae with Sodium Bromide should be discouraged as mentioned above.

The best way to prevent and control algae is to maintain good pool care. Good pool care means following the 5 Keys to pool care (look for our published articles on theses subjects): 1. Have and maintain good circulation of the water to all parts of the pool. 2. Filter the pool a minimum 8 to 12 hours daily. 3. Clean the pool regularly by vacuuming and brushing all surfaces. 4. Test the Water at least 2 times each week. Testing tells you what is going on with the water. Make adjustments immediately when necessary. 5. Maintain good Water Chemistry. Chlorine or other sanitizer in their correct ranges, pH 7.4 – 7.6, Total Alkalinity 100 – 150 ppm, Calcium Hardness 200 – 300 ppm. On a weekly basis (every week all season long): Shock the pool with the appropriate shock treatment and add a maintenance dose of a good quality algaecide (please don’t use the gallon jug algaecide – they’re mainly colored water).

Article Source: http://EzineArticles.com/1261708

Pool Opening – Get the Most From Doing It Right

Spring is blooming across the country and the pool is on that “to do” list of outdoor chores. Why not lessen the chore and make life a bit simpler this year? Removing your swimming pool can reduce hazards and liability so leave it with your pool removal Sydney.

If you’re thinking, “Ron, you’ve got to be kidding!”, then let me put it this way: taking it step by step a little at a time starting a month or more before “officially” opening the pool DOES make pool opening simpler. Following a few easy to follow steps makes it manageable with less stress and overall better success.

First things first. After a long, cold winter just get out there and take a look. You may not want to! Seeing all those accumulated leaves on the cover, not to mention the water may just cause you to stop right there. Instead, hook up your cover pump and start getting that excess water off of the top of the cover. Remember that wherever the water level is on TOP of the cover, that’s where the overall water level itself is.

If the water is fairly clear, don’t worry too much about pumping that water that’s on top, back underneath and into the pool. Especially if the water is cold and clear. The purpose of doing that is to take advantage of the free water. At the same time add a bottle of a good quality (40% strength or greater) algicide into the water right at the point where the top water is going in. Even though the filter or pump may not be hooked up, the water and algicide will flow around the pool.

If you have a white plaster or marble dust finished pool, DO NOT add any type of algicide containing copper at this point. You always want to have the filter system operating to properly circulate the product containing copper. If you don’t, you risk staining the pool surfaces.

Why algicide at this point? An early addition of algicide will begin to combat and prevent early algae growth. This is especially true if you have a mesh style winter or safety cover that allows sunlight to penetrate into the water. Ideally, the best thing to do is to remove the cover from the corners of the pool, take your leaf net and simply swish the water around for a couple of minutes. That will be adequate after adding the algicide.

What else should you consider adding?

If you know that you are prone to metal staining due to heavy metals such as iron, copper or manganese being present in the tap water (this is why you use some of the cleaner water from the top of the cover), prevent staining by adding a good quality metal and stain preventative. If scaling (due to high calcium levels) is a problem during the season, you can add a scale inhibitor at the same time. Remember that calcium is a mineral that dissolves better at colder water temperatures (under 80 degrees F). As the water warms, and gets very warm or is heated, scale can form and dramatically reduce heating efficiency; even if you are using a solar heater (those small tubes are just waiting for scale build-up).

One of the most often neglected products to use at spring pool start up is a good quality enzyme. Enzymes are excellent in prepping your pool’s water for opening and spring start up. Enzymes consume certain organic wastes and build-ups before you get started. Enzymes are best used when you have attached the pump and motor and have started the system.

Starting the filter system while the winter cover is still on is an absolutely terrific idea! You get the water moving and filtered. You get the preventive chemicals circulating. You get the water warming up faster. I began doing this over the past couple of years. I have several trees that don’t finish shedding their early flowers or seeds until late May. The cover stays on and the water remains clean. When the cover comes off, it’s almost ready to swim in.

One chemical that you should NEVER add while the cover is on is any type of shock treatment. Regardless of whether it’s a chlorine or non-chlorine shock ALWAYS have the cover OFF of the pool for a minimum of 4 to 6 hours. Why? The job of the shock treatment is to oxidize or burn off wastes (including ammonia compounds) from the water. As the shock does this oxidation work, those impurities have to “gas-off”. If the cover is on, those gases simply hit the underside of the cover and fall back into the water to re-form as chloramines. Now when you open the pool, you’ll have even more chloramines to deal with which could lead to a serious chlorine demand problem that will be difficult – and expensive – to resolve.

A couple of more Do’s and Don’ts when starting the pool:

DO – Remove excess leaves and debris before removing the winter cover. You definitely DO NOT want that stuff going into your pool.
DO – Balance the pH, total alkalinity, and calcium hardness. Balance it according to mid-summer parameters taking water temperature into consideration.
DO – Consider using a biofilm removal product when first starting. Biofilms are the source of many water problems including white water mold and pink slime, never mind scaling issues, and often times algae. A new products named AquaFinesse Pool Water Care Tablets are easy to use and are an excellent choice.
DO – Shock the pool well. We recommend 3 to 4 times the normal amount for best results. Many pool owners have problems in the middle of the summer because they didn’t adequately shock the pool (or continue doing this step) at start up.
DO – Start with fresh water testing reagents or test strips.
DO – Allow the water to circulate 2 – 3 days continuously before testing. Many chemical components need to be circulated for a proper test.
DO – Chemically clean the filter about one week after opening.
DO – A manual vacuuming and brushing as the first cleaning of the new season. Brushing and vacuuming helps to remove organic build-up from the pool’s interior surfaces and helps to circulate spring opening chemicals.
DO – Chemically clean the solar blanket before using it for the first time of the season.
DON’T – Randomly add water balancing chemicals. Just because you needed or added 25 pounds of total alkalinity increaser last year, doesn’t mean you’ll need the same this year. You many need more or you may need less. Always test first.
DON’T – Add cyanuric acid (also known as CYA, stabilizer, conditioner, sun shield, etc) until after a proper test. Once CYA has been added to the pool, it doesn’t come out of the water unless backwashed out or other wise diluted. It stays in the water from year to year. Excess CYA is an unnecessary expense and can add to a high Total Dissolved Solids (TDS) problem.
DON’T – Use muriatic acid to clean your filter. Muriatic acid will set greases and oils into DE or Cartridge filter fabrics.
DON’T – Use your automatic pool cleaner until after the initial vacuuming and brushing.
DON’T – Put on the solar blanket until after the water is balanced and has been shocked.

Even opening your own pool shouldn’t take longer than 2 to 3 hours for the average residential inground or aboveground pool. Happy Swimming! Use and enjoy your pool.

Article Source: http://EzineArticles.com/6142896

Window Cleaning Screens Basics

You mean we have to clean the screens too? Why clean the screens, it’s not glass? Well cleaning the screens are a very important part of window cleaning and should always be done. It makes no sense to have the windows cleaned and put dirty screens back on in front of the window pane. If it rains you can bet those windows are going to be dirty again right away. How often you use leather care, as with the other treatments, really depends on what you want.

When it comes to screen cleaning, not every customer wants to have them done, thinking it will save some money. It may save the customer some money but as soon as the wind kicks up or it rains, all the money they just spent to get their windows cleaned, just cost them even more. So be sure to mention that to the customers if they tell you they don’t want to have them done. It’s more money for you and better service for them. If you offer a rain guarantee on your work, be sure that guarantee is void if they don’t have their screens cleaned.

There are two ways to offer screen cleaning. One way is to have screens as an additional add-on. Some window cleaners charge for the window to be cleaned and then charge additional if the customer wants their screens cleaned, sills wiped, tracks cleaned and so on. The other method is to offer an all inclusive, so that the screens are already apart of the price you quote them. I personally recommend the all inclusive. This way you know they are going to have great looking windows and you don’t have to sell them on the other features.

So let’s talk about the basics of cleaning screens. There are a few ways to clean screens and I will teach you how to do three of them that I think are the most effective. First there is the dry brush method. Second is a wet cloth knock out method. Last is the wet cloth and hose method.

The dry cloth method should only be used on screens that are pretty clean to begin with, especially screens that fit into the window inside the house as opposed to outside. If the screens are outside then they better look like new already or you risk having dirt on the window when it rains next, which could result in a very unhappy customer. The dry method is simple and fast. I like to use a dry washcloth, I then wipe the cloth from top to bottom back and forth across the screen. Once you finish one side be sure to flip the screen and do the other side. To finish be sure to wipe down the entire metal frame holding the screen.

Next is the wet method, which is very effective for cleaning and will result in great looking screens. To start you use your washing wand and scrub the screen like you would a window, be sure to clean both sides of the screen. It helps to scrub in circle motions. Next you raise the screen a little higher then waist level and then tap the end furthest from you on the ground to knock out most of the soapy water. Flip the screen around and tap out the other side. Then you grab a wet washcloth that has been rung out and flick it against the screen almost parallel to the screen to get out the rest. Swat at the screen like you were throwing darts at the ground, except with the rag in your hand. Be sure to wipe down the metal frame at the end.

The last method is pretty much like the second method except in the interest of saving your arms from a lot of hard work, you use a hose with a spray nozzle attached to wash out the soapy water instead of so much swatting at the screen with the wet washcloth. It’s important to get all the soap out of the screen or it will dry white. This is the best method to clean out all the soap and save your arm. However this method could potentially take more time as you will need to gather up all the screens to one washing location, as where the other methods you could clean on the spot where the screen go or gather to locations for each side of the house.

When cleaning the screens you want to develop a method to know where the screens go. You don’t need to know each window, just which side of the house the screens belong to. If you keep screens on each side of the house already, then you might make piles of first and second floor for each side of the house. Good organization will help you put the screens back faster, also some screens might look the same size but might be off a little, making for a tight fit if put in the screen in the wrong window. This can come back to haunt you when you go to take it out again, assuming you will be cleaning that house again in the future.

Some window cleaners will actually mark the frame of the screen indicating where it goes, however I don’t think it’s necessary, and more importantly it’s not very considerate of your customers property, so be sure to get permission if you decide to mark them. Another thing some window cleaners do is to scrub the screens with a brush as opposed to a washing wand. Both work, however I find the washing wand to be faster. You can also play around with other cleaning chemicals to get the screens cleaned, I however try and avoid any chemical and stick with Dawn Ultra for all my cleaning. If you decide to try some chemicals be sure to wear protective gloves and goggles. Click here to check our leather car products.

Mike Burrell Squeaky Clean Window Washing

Article Source: http://EzineArticles.com/expert/Mike_Burrell/303865

Article Source: http://EzineArticles.com/2181840

Nanotechnology Makes Cars Shinier, Safer, More Fuel Efficient

Nano paint protection for vehicles is the very best feasible type of finish for your car s surface because not just does it keep the sparkle of your paintwork gleaming as though it has actually simply left the display room, but it is additionally self-cleaning. To overcome financial troubles and budget problems while spending on your vehicle, paint protection Adelaide can offer outstanding benefits and you don’t have to spend a lot to repaint your vehicle.

The procedure behind it is fascinating and is based on something from nature. It is called the lotus effect considering that it was found that the lotus blossom has self-cleaning homes on its leaves. This also applies to other plants such as walking cane, nasturtium and irritable pear. Additionally, some insects such as specific butterflies and dragonflies have the same ability.

When Was The Lotus Impact Found?
Researchers initially began to study this sensation in 1964, and the job was more created by Barthlott and Ehler in 1977; it was they that first coined the term the lotus impact. The fallen leaves of the lotus floral have an exceptionally high water repellent property which is called super-hydrophobicity. When it rainfalls, water droplets roll across the fallen leaves and pick up gunk, removing it from the surface, thus enabling the plant to remain clean and the fallen leaves to perform their function of photosynthesis to make it possible for the plant to grow.

The high surface strain of a water droplet indicates that it tends to lessen its surface in an endeavor to attain a shape which is as near to a sphere as feasible. On reaching a surface, forces of bond cause the area to come to be moist. The surface could come to be partially wet or completely moist and this will certainly depend on the liquid stress of the water droplet and the sticky attributes of the surface area.

The less of the water droplet that touches with the surface, the higher that area s hydrophobicity is claimed to be. This hydrophobicity can be gauged by the call angle of the water droplet on the area. The lesser the contact angle, the lesser the hydrophobicity and the other way around. If a contact angle on a particular surface area is less compared to 90 degrees the surface area is referred to as hydrophilic. Above 90 degrees it is hydrophobic.

Some plants have a call angle of as high as 160 degrees meanings that only about 2 % of the water droplet touches with the surface. In the case of lotus leaves, the contact angle is as higher as 170 degrees. These areas are claimed to be super-hydrophobic. The area of a water droplet touching a lotus fallen leave may be as litlle as 0.6 %.

Just how Does Dust Acquire Cleaned Off The Surface area?
When dust gets on to such a surface area the quantity of bond in between the dust fragment and the surface area is far less than on many others surface areas. When a water droplet rolls across the area the quantity of adhesion between the area and the dirt particle is less compared to that between the filth fragment and the droplet, so the filth bit is gotten by the droplet and carried away causing automated cleansing of the surface area. However, this only works as a result of the high degree of surface stress of a water droplet and does not work in similarly with organic solvents.

Fundamentally, that is just how it helps the lotus leaf. Precisely the very same principle is used in nano paint innovation for car paint protection Melbourne.

Just how Does Nano Paint Protection Work For Cars?
Nano modern technology has actually advanced to the point where a difficult safety ceramic finish can be applied to the lacquered completed area of the car s paintwork when it leaves the manufacturing facility. The lacquered surface is not resistant to bird droppings, UV, or chemical etching and could be easily harmed or scraped. When this takes place the only option is to brighten off the scratch marks or swirl marks thereby reducing the density of the manufacturing plant paint layer. Over time this means that inevitably a respray will certainly be called for.

Many individuals will utilize a wax polish or a polymer paint sealant on the paintwork, but this still leaves the paint area vulnerable to harm from square one, bird droppings and so forth, as these can permeate the gloss or sealer.

Just what Is the Solution?
The answer is to use a hard nano paint modern technology coating to the surface of the paintwork. The layer is much less at risk to damage compared to other surface finishes, but even if swirl marks or various other damage ought to happen the covering itself can be polished off and re-applied. This suggests that the factory paintwork will certainly not be harmed and will certainly maintain its thickness and sparkle.

Essentially nano innovation duplicates the results discovered in attributes in a basic method and super-hydrophobic finishes have actually been used on guy made areas for a substantial variety of years. One such application is self-cleaning glass used for windows, however they have actually been made use of in numerous other applications. For example, super-hydrophobic finishes integrating Teflon fragments have been utilized on med analysis slides.

The same innovation has actually been utilized for points as unique as roof covering floor tiles and leather-made upholstery. It could be made use of on satellite television recipes, as an example, in order to minimize the possibility of rainfall fade and to combat any sort of accumulate of ice and snow on the antenna.

It has actually also been used for plant growing. The Groasis Waterboxx is a gadget designed for planting little trees in areas of severe dry spell which enables the young sapling to have sufficient water reach its roots until the root systems drop far good enough into the ground to reach water. The Waterboxx can then be gotten rid of and made use of once again in other places. Nano technology allows the Waterboxx to collect dew and condensation and funnel it down to the root systems of the sapling also in areas of desert.

In order to shield the paintwork of your auto and preserve that fresh out of the showroom appearance with none of the effort, nano paint protection is the answer for the discerning driver. You will never have to worry about scrape marks or bird droppings, and your car will just require a fast rinse to eliminate any filth. It doesn’t issue whether your automobile is brand-new, or numerous years of ages; we could keep it the way it is, or recover it to the means it was. Want to achieve a good looking and clean vehicle, click here and we will give you tips.

You will likewise have the ability to laugh at your next-door neighbors washing and polishing every Sunday morning!

Multipurpose Cleaner – Basic H

Many of us are looking for the best multipurpose cleaner; a cleaner that could do almost everything we need, be effective and gentle to us and the environment. There is such a cleaner. It is called Basic-H2. This official Earth Day product is made by the number one natural nutrition company in the United States. It is used to clean surfaces in spacecrafts, submarines and oceanic research vessels, among other interesting users. There is so much to say and like most things in life it is best to start at the beginning. Every week you need to apply a window cleaner from your car to ensure that there are no streak around it.

Basic-H was founded by Dr. Shaklee, who founded the Shaklee Corporation with the motto, “In Harmony with Nature and Good Health.” Dr. Shaklee discovered the formula for Basic-H when he wasn’t looking for it. He noticed that when he wiped the lube from his hands they were clean. He set the formula aside until 1960 when he used that formula to make the first concentrated, organic, non-toxic, biodegradable cleaner. Before “going green” was popular, Dr. Shaklee made it his life and his company’s mission to bring the benefits of nature into safe, usable and effective products. For Dr. Shaklee, creating Basic-H was just one of the first steps in a lifetime of health and environmental achievements.

Basic-H literally has 1001 uses. From being used by farmers for a myriad of things to uses for all around our homes, inside and out, it does it all. The problem for me is that I can not possibly tell you all the wonderful things it can do in this one article, so I’ll stick with the basics:

*Non-Toxic- absolutely no harmful ingredients, same pH balance as skin. No noxious fumes to avoid, best thing to remove harmful pesticides from fruits and vegetables.

*Economical and concentrated- 1/2 gallon makes up to 192 gallons of powerful multi purpose cleaner which can last over a year.

*Biodegradable- completely returns to organic matter in water and dirt within seven to thirty days.

*Makes water “wetter”- the natural components in Basic-H, activated by water, allows it to penetrate deeper into surfaces thereby releasing dirt and grime.

*Multiple uses- great and economical as a window cleaner, grease remover, fertilizer for lawns gardens household plants and crops, body wash, general cleaner, burn relief keep a small bottle by the stove, a couple drops in boiling water and boiled eggs peel easier, awesome spot remover, keeps dust away perfect for dusting computers, replaces commercial floor cleaners, emulsifies grease and regular use will keep pipes free-running, washing your car or boat, washing the family pets and spraying the lawn is great for keeping fleas away, bug’s hate this stuff so it is perfect and safer for use as insect repellent instead of commercial bug sprays, helps remove wall paper, great liquid hand cleaner, gets gum off and out of hair and fabrics, perfect for shaving, and for now my personal favorite, using a drop or two with your shampoo will make it suds more and make your hair softer.

Perhaps the best aspect of Basic-H is that it is completely safe for the family. My husband’s parents have been selling Shaklee for 30 years so he grew up around Shaklee products. This was a good thing especially since he was a young curious boy. Imagine being a child and having the desire to whip up a “special” potion to strip a toy car of paint, as my husband did. Under the sinks or on the top shelves of closets in most homes are a slew of dangerous chemicals used to clean windows, floors, sinks, bathrooms etc. Picture a child mixing these things together and what the outcome would be. Scary thought.

What my husband grudgingly found out about Shaklee was that nothing bad happened, no toxic concoction or steaming bowl of acid. The toy car he was trying to strip of its paint only came out clean and with perfectly lubed tires. He remembers being so disgusted he tried to get his mom to buy the commercial cleaners, which she of course refused to do. Imagine if your child made a “potion” with your cleaning products. Would you be afraid of the outcome? Changing the way we clean our homes can go a long way to protect our families, not just being by toxin free but also by keeping them safer from accidental poisonings.

Part of the fun with Basic-H is discovering the 1001 ways to use it. It is no wonder it goes everywhere with those who do. Being a mother of three, I personally keep a small bottle in my purse for emergencies and it has come in handy more than once. I would not be without my Basic-H at any time if I could help it. We take it on every trip even if it’s only a few hours away, and it’s a must for camping. Seeing is believing and when you see what Basic-H can do you won’t want to use anything else.

Basic H has to the most versatile product I have ever used. Another bonus is that Shaklee has other Earth Friendly Cleaning Products available. You can click here the highlighted links to find out more about all of Shaklee’s wonderful Products.

Article Source: http://EzineArticles.com/expert/Steven_Michael_Geysbeek/495149

Article Source: http://EzineArticles.com/3906669

Ceramic Nano Coating Confidently Protects Your Car

Nano paint protection for cars is the best feasible kind of finish for your car s area considering that not just does it keep the sparkle of your paintwork gleaming as though it has just left the display room, but it is additionally self-cleaning. We can coat your wheel’s in Opti Coat Pro just the same as your exterior car paint protection Adelaide, this will prevent brake dust bonding and keep your wheels cleaner longer.

The process behind it is exciting and is based upon something from attributes. It is called the lotus result due to the fact that it was discovered that the lotus floral has self-cleaning properties on its leaves. This additionally applies to some other plants such as walking cane, nasturtium and prickly pear. In addition, some pests such as particular butterflies and dragonflies have the very same ability.

When Was The Lotus Effect Discovered?
Scientists initially started to learn this phenomenon in 1964, and the job was additional established by Barthlott and Ehler in 1977; it was they that first coined the term the lotus result. The leaves of the lotus blossom have a remarkably higher water repellent property which is called super-hydrophobicity. When it rains, water droplets roll throughout the leaves and pick up dirt, eliminating it from the area, thus allowing the plant to stay clean and the fallen leaves to do their function of photosynthesis to make it possible for the plant to expand.

The high area stress of a water droplet suggests that it has a tendency to minimize its surface area in an undertaking to accomplish a form which is as close to a sphere as feasible. On reaching a surface area, forces of attachment reason the surface area to become wet. The surface could end up being partly wet or totally damp and this will certainly depend on the liquid tension of the water droplet and the adhesive nature of the area.

The less of the water droplet that is in contact with the area, the greater that surface s hydrophobicity is stated to be. This hydrophobicity could be determined by the get in touch with angle of the water droplet on the surface. The lower the call angle, the reduced the hydrophobicity and vice versa. If a contact angle on a particular surface area is much less compared to 90 levels the surface is referred to as hydrophilic. Higher than 90 levels it is hydrophobic.

Some plants have a call angle of as long as 160 degrees which means that just around 2 % of the water droplet is in contact with the area. In the case of lotus leaves, the contact angle is as high as 170 degrees. These surface areas are claimed to be super-hydrophobic. The area of a water droplet touching a lotus leaf could be as litlle as 0.6 %.

Just how Does Dirt Get Washed Off The Surface?
When dust jumps on to such an area the amount of adhesion between the dust fragment and the area is much less than on many others surfaces. When a water droplet rolls across the surface the amount of bond between the surface area and the gunk particle is less compared to that between the dirt fragment and the droplet, so the dust bit is gotten by the droplet and brought away causing automated cleaning of the surface. This only jobs considering that of the higher degree of surface tension of a water droplet and does not work in the exact same way with natural solvents.
Basically, that is exactly how it works for the lotus fallen leave. Precisely the very same concept is used in nano paint technology for car paint protection Melbourne.

Just how Does Nano Paint Protection Work For Autos?
Nano technology has actually advanced to the factor wherein a challenging protective ceramic covering could be applied to the lacquered completed surface of the car s paintwork when it leaves the manufacturing plant. The lacquered surface area is not immune to bird droppings, UV, or chemical etching and can be easily harmed or damaged. When this takes place the only choice is to brighten off the scratch marks or swirl marks thereby decreasing the density of the manufacturing facility paint layer. Over time this indicates that eventually a respray will be needed.

Lots of people will certainly utilize a wax polish or a polymer paint sealant on the paintwork, however this still leaves the paint surface area vulnerable to damages from the ground up, bird droppings and so forth, as these can penetrate the polish or sealant.

What Is the Response?
The answer is to apply a hard nano paint modern technology covering to the surface of the paintwork. The coating is much less susceptible to damages compared to any other area coverings, but even if swirl marks or various other damages need to occur the finish itself can be polished off and re-applied. This means that the manufacturing facility paintwork will not be harmed and will certainly keep its density and shine.

In effect nano modern technology duplicates the results found in attributes in a general means and super-hydrophobic layers have actually been made use of on man made areas for a considerable variety of years. One such application is self-cleaning glass made use of for home windows, however they have been made use of in numerous other applications. As an example, super-hydrophobic coatings integrating Teflon bits have been utilized on clinical diagnostic slides.

The same technology has been made use of for points as varied as roof floor tiles and leather furniture. It can be made use of on satellite television dishes, as an example, in order to decrease the opportunity of rain discolor and to neutralize any kind of accumulate of ice and snow on the antenna.

It has actually even been utilized for plant growing. The Groasis Waterboxx is a gadget designed for growing little trees in locations of severe drought which allows the youthful sapling to have enough water reach its roots until the root systems decrease much enough into the ground to get to water. The Waterboxx could then be gotten rid of and used once more somewhere else. Nano modern technology allows the Waterboxx to harvest condensation and condensation and channel it to the origins of the sapling even in locations of desert.

In order to safeguard the paintwork of your auto and maintain that fresh from the showroom appearance with none of the effort, nano paint protection is the solution for the critical motorist. You will never ever have to fret about scrape marks or bird droppings, and your vehicle will only need a fast rinse to eliminate any type of dirt. It doesn t matter whether your auto is new, or many years of ages; we can keep it the way it is, or recover it to the way it was.

You will certainly likewise have the ability to make fun of your neighbors washing and polishing every Sunday early morning! Click here to attain the highest quality of car paint.

8 Signs You May Have a Problem with Your Electrical Wiring

Electrical malfunctions cause more than 50,000 house fires each year, according to Electrical Safety Foundation International. The majority can be prevented. 24 hour electrician Melbourne focus not only fixing your electrical problems but also making your home safe from any fire.

To protect your own home, start by checking your fuse box or breaker panel for the date of your last inspection. Most municipalities require an inspection only when a system is modified during a renovation or an addition. However, the Consumer Product Safety Commission recommends having a pro look things over every 10 years. Beyond that, be aware of these potential sources and causes of electrical fires.

Related: Quiz: Are You Prepared For a House Fire?

1. Too many extension cords. Aesthetics aside, there’s a reason electric wires are buried within walls. “An undisturbed wiring system will more or less work forever,” says William Burke, division manager of electrical engineering for the National Fire Protection Association. “But when it’s disturbed or altered, there’s potential for trouble.” Running an extension cord creates additional points where cords can kink, short out or get pinched, leading to tripped breakers, damaged outlets or even a fire. Use extension cords sparingly and for short periods of time — during the holidays, for example. If you consistently need more outlets, have an electrician install them.

2. Dimming or flickering lights. Because light fixtures typically draw only a small amount of power, dimming or flickering is rarely caused by a problem with the fixture itself. More likely the issue is with energy hogs like major appliances or space heaters that are wired to the same circuit. “Appliances that heat or cool tend to draw a lot of power,” says Burke. So dimming could be caused by a washing machine drawing current to heat water. Consult an electrician about moving lights to different circuits or installing dedicated lines for major appliances.

3. Funny odors. A new appliance may produce an off-odor the first few times it’s powered up. But if you detect an odd smell coming from an outlet, turn off and unplug anything connected to it. Don’t use it again until you’ve had a qualified electrician check it out. If your fuse box or breaker panel has a weird odor, call an electrician right away.

4. Sparking. This is never a good sign. How you deal with it depends on where it’s coming from. If a breaker panel, fuse box or outlet is sparking, get an electrician in ASAP. But a sparking appliance may mean that the fixture itself is damaged, in which case you should call an appliance repairperson. He can test the appliance and usually the outlet that powers it as well. A service call from a repairperson is likely to be cheaper than one from a licensed electrician. Plus, if the appliance is new, it may even be repaired under the warranty.

5. Hot outlets or switch plates. “Even when an appliance is meant to produce heat (like a toaster or space heater), the outlet that powers it should never become hot,” says Burke. Electric current may make a switch plate slightly warm to the touch, but if the outlet is uncomfortably hot, turn off whatever is plugged in and try it in another outlet. If the outlet grows hot even without anything plugged in, it may be wired incorrectly. Consult an electrician, who may advise you to flip the breaker or remove the fuse for that outlet until your system can be serviced.

Related: How to Use a Space Heater Without Causing a Fire

6. Frequently blown fuses or tripped breakers. Circuit breakers and fuses are designed to fail as a way to prevent overloading. If a vacuum cleaner or hair dryer routinely trips a breaker regardless of where you plug it in, the appliance is the likely culprit. But if using a single outlet causes you to blow the same fuse repeatedly, the circuit is probably overloaded. Call in a pro to discuss upgrading the circuit or adding a new line.

7. Buzzing. What does electricity sound like? When things are working properly, nothing. Generally electricity flows smoothly and quietly between connections. But loose prongs, outlets or fraying wire can all cause the current to jump, producing a buzzing sound in the process. If you’re sure a sound is originating at an outlet, stop using it and call an electrician.

8. The wrong outlets in the kitchen or bathroom. Because water is an excellent conductor of electricity, kitchens and bathrooms both require special shock-resistant outlets called ground fault circuit interrupters (GFCIs). GFCIs typically have two small buttons at the center. If outlets in your kitchen or bathroom outlets look no different from those in your family room or bedroom, swap them out with GFCIs to add an extra layer of shock protection around water.